A badge holder that’s too small won’t fit your card. One that’s too big lets the card slide around and looks sloppy. Getting the size right starts with one question: what are you putting inside?
Start with what goes inside
- A printed ID card (like a credit card size PVC card): choose a holder sized for that card.
- A paper insert printed on your office printer: choose a holder that matches the insert size.
- A large event badge: choose a larger holder, often vertical.
Measure your card or insert before ordering, and check the holder’s listed size on the product page.
Common paper insert sizes
These insert sizes are available with badge holders on our lanyards. Each also comes rotated for horizontal or vertical use.
| Insert size (inches) | Typical use |
|---|---|
| 2.12 x 3.38 | Credit card size ID |
| 2.75 x 4.13 | Standard name badge |
| 3.15 x 4.72 | Event badge |
| 3.54 x 5.12 | Larger event badge |
| 4.13 x 5.51 | Conference badge with schedule or logo |
Badge holders you can add to a lanyard order
When you order custom lanyards, you can add a badge holder for +$0.27 each (as of October 2026) in these sizes:
- 2.5 x 4.5 inches
- 3 x 5.25 inches
- 3.875 x 3.25 inches
- 4.5 x 3.75 inches

Horizontal or vertical?
- Horizontal holders suit standard ID cards and name tags, and work well with badge reels and clips.
- Vertical holders suit event badges with a name, title, company and logo stacked top to bottom. They hang well from double clip lanyards. See Double Clip Lanyards: Keep Badges Straight and Readable.
Holder types and when to use them
| Holder | As low as | Best for |
|---|---|---|
| Plastic badge holders | $0.11 | Events and everyday ID |
| Vertical 6 x 4 inch badge holder | $0.14 | Conferences and large badges |
| Bulldog clip badge holder | $0.27 | Clipping to clothing |
| Zip badge holders | $0.40 | Outdoors and wet conditions |
| Hard plastic badge holder with slot | $0.52 | Cards used every day |
| Premium PU card holders | $0.91 | Executive and hospitality |
| Armband badge holder | $2.32 | When nothing should hang from the neck |
Prices are the lowest per-piece prices at our highest quantity tier, as of October 2026.
Sizing tips
- Measure the card or insert, not the holder.
- Check the holder’s inside opening on the product page.
- Leave a little room so cards slide in easily, but not so much they move around.
- For conferences, design your badge to fit a standard insert size so printing is easy.
- Order a few extra holders for reprints and late registrations.
For event badges, see Conference Lanyards and Badges: The Complete Planning Guide.
Frequently asked questions
Choose a holder made for a 2.125 x 3.375 inch card, or the 2.12 x 3.38 inch insert size.
Larger vertical holders, such as the vertical 6 x 4 inch badge holder.
Yes. Add one for +$0.27 each in four sizes (as of October 2026).
A zip badge holder.
Horizontal for standard ID cards, vertical for event badges.
Find the right holder
Browse plastic badge holders or call 1-855-711-4467 and tell us what you’re putting inside.
